SCROLL
We Are Committed To
Materials fall into the gap between two rollers through the feeding inlet and are crushed by the extruding force of counter-rotating rollers. Finished products fall down naturally.
When encountering excessively hard or uncrushable materials, the rollers automatically retract under spring force to enlarge the gap. Hard materials fall off accordingly, protecting the machine from damage.
A negative pressure dust collection device can be installed at the discharge port to prevent dust when the machine is used alone.
Stirred Mill / Attritor is a powder refining equipment that uses a low-speed stirring shaft to drive materials and grinding media (usually small beads) for high-energy density grinding in a narrow space.
Raw materials enter the silo and are instantly frozen at ultra-low temperature by liquid nitrogen inside the machine.
After becoming low-temperature brittle, materials enter the crushing chamber.
Materials are kneaded, sheared and crushed between the rotary crushing cutter disc and arc-shaped lining grinding plate.
Crushed materials are classified by the classification wheel and conveyed into the dust collection bag by negative pressure.
For precise particle size classification of powder materials.
Centrifugal field formed by high-speed rotation.
Lithium battery cathode & anode materials.
Ceramic powder / Fine chemical powder.
Metal micropowder.
Can be matched with micro-crushing equipment for classification.
Suitable for 24-hour continuous operation.
Materials to be ground enter through an open hopper or conveying pipeline.
They enter between the two grinding discs, where the rotor rotates at high speed relative to the stator.
This causes the materials to be ground at high speed between the two grinding discs.
The system adopts a modular design, allowing flexible interchange and docking of the crushing system, hammer equipment, and cone equipment according to process requirements.
It can be used for powder production of ultra-high molecular weight polyethylene and pharmaceutical materials.
Suitable for crushing agglomerated and crystalline materials with a particle size of 5mm-50mm.
Applicable to aseptic production and dust-free production.
Suitable for dry, wet and heat-sensitive materials.
Direct motor connection ensures strong transmission capacity, with efficiency 5% higher than belt drive. No belt or belt cover is required.
Low noise, simple structure and convenient maintenance.
The discharge particle size is adjustable, and the gap adjustment is simple and clear. It has strong practicality and can meet different customer needs...
Renovator has rich practical experience in the design and construction of pipeline conveying systems.
With the increasing advantages of dry crushing technology, ceramics featuring low permeability, high wear resistance and corrosion resistance have become indispensable in the lithium battery industry. It has gradually become the mainstream application in mechanical crushing, shearing and fluid pipelines.
2026.03.27 2026.03.26 2026.03.24 
EN
